Kiosk Technical Specification
We are able to supply kiosks that match customers requirements exactly. We therefore offer a full range of optional extras, allowing you to customise the kiosk to your particular needs.
The Fibaform Guardian range of kiosks are fully insulated throughout with high density polyurethane foam bonded between the inner and outer skins during the moulding process, to a “U” value of approximately 1.2Wm sq. Higher levels of insulation can also be specified.
Windows are manufactured from 4mm toughened glass in anodised aluminium or powder coated frames. Windows can be specified with either radius or square corners. Frames can also be supplied to match the exterior colour of the kiosk. Double glazing and sun reflective glass can also be specified.
Standard doors are constructed from reinforced glassfibre and are fitted with stainless steel hinges, mortice lock and check straps. Doors on 2.4m panels are fitted to the left. Doors can be hung on the left or right (but are not interchangeable).
Door options available include:
- Aluminium framed top glazed door
- Heavy duty door closer
- Door moved to right of panel position
Glassfibre vending windows with stay (can be specified for either 1200mm or 2400mm panel).
Ventilation options include 100mm diameter roof mounted manual ventilator and 150mm diameter wall or roof mounted extractor fan.
Kiosks are supplied ready to be fitted onto a level concrete base using 10mm expanding bolts. Alternatively, kiosks can be supplied with a steel base with fixing points allowing units to be used where a concrete base is not practical.
The interior of our kiosks are finished in a flecked washable textured coating. The resin coated internal finish can be specified in any colour from the standard external colour range
A standard set of electrics comprises of fluorescent light fittings, switched 13 amp, double socket wired into a 4 way consumer unit with mini circuit breakers and main RCCB. Additional options include a 2kw wall mounted convector heater with IP 65/66 rated fittings.
Standard floors comprise of 18mm “Garuda Mesh” phenol coated hard wearing anti-slip plywood over a 25mm layer of E.P.S. polystyrene for insulation.
Additional floor options include:
- Heavy duty vinyl floor covering
- Heavy duty contract carpet tiles
- Ribbed rubber matting
Canopies & Shelving
Kiosks can be supplied with external canopies (500mm wide) and shelves (230mm wide). These are manufactured from glassfibre and can be specified in the same or a different colour to the kiosk if required.
Additional options include:
- GRP canopy for 840mm x 500mm and 840mm x 840mm windows
- GRP canopy for 1750 x 840mm windows
- GRP shelving 1000mm
- GRP shelving 2000mm
Kiosks can be supplied with glassfibre shutters to give protection to windows. These are supplied in the same colour as the kiosk and can be either hinged or fitted in aluminium tracking. Alternatively, steel mesh anti-vandal guards or roller shutters can also be specified.
Security options include:
- GRP shutter for 840mm x 500mm ad 840mm x 840mm windows
- GRP shutter for 1750mm x 840mm window
- Steel mesh anti-vandal guard for 840mm x 500mm window
- Steel mesh anti-vandal guard for 840mm x 840mm window
- Steel mesh anti-vandal guard for 1750mm x 840mm window
Additional options also include:
- Heavy duty interior shelving
- Document drawer with lock
- WC cubicle (with hand basin and cold water supply loose fitted)
- Electric hot water heater
- Air conditioning
- Kitchen area
External Colour & Finish
Any colour (gloss) is available from the BS4800 range and a range of textured finishes are available, details on application.
If the specification you require is not covered here, please contact us for advice as we specialise in providing bespoke solutions.
Kiosk Interiors Gallery
Please take a look at our Kiosk Interiors Gallery below to view a selection of some of the Kiosk interior fit-outs we can provide.